Description XS_Scuba LP Port Adapter This XS_Scuba LP Port Adapter, AC940, is constructed using brass, and has a black chrome finishing. Viton o-rings are used, wherever applicable. This port adapter is meant for low pressure (below 200psi) use only. Specifications of XS Scuba LP Port Adapter: 1/2”-20 male to 3/8”-24female Allows the connection of a standard LP regulator hose (3/8”-24) into a large size regulator LP port (1/2”-20) (3/8”-24)into a large size regulator LP port (1/2”-20) A Low Pressure (LP) port adapter is used in scuba diving when you need to connect a low-pressure regulator or accessory (like a buoyancy control device (BCD) inflator, a drysuit inflator, or a second stage regulator) to a tank valve that has a different type of connection or when there’s a mismatch in port sizes. Here are some common scenarios when you would use an LP port adapter: Regulator and Tank Valve Compatibility: If your tank valve has a higher pressure (HP) port, but your regulator or accessory requires a low-pressure port, an adapter allows you to connect the low-pressure device to the tank valve. Additional Low Pressure Connections: If you have a tank with limited LP ports and you need to connect more than one low-pressure accessory (e.g., a second-stage regulator and a BCD inflator), you can use an adapter to create an extra connection point. Custom Setups: In cases where you’re modifying your diving gear or assembling a custom regulator setup, an adapter helps in adapting between different connection types or sizes for LP ports. The LP port generally delivers pressure from the tank regulator’s first stage (around 140-150 psi), while HP ports deal with the tank’s full pressure (around 3000-3500 psi, depending on the tank). Scuba Warehouse stocks up an extensive list of other adapters for your scuba diving use. Do come on by to our store to have a look at what other items you need!
